How to install a dome tent

dome tent

#1. Open the package which is including the main profile, steel connection, fixation kit and PVC membrane cover. You’d better make a classification on them according to the model number. Of course, if you buy geodesic dome from us, we will send you the classified package.

#2. According to the size of the geodesic dome, you need to make a circular mark of the dimension. In addition, you need to decide the direction of the door.

#3. Start to build the profile tube from the door. Fixing the first lap base and then begin to build the first layer of triangular structures.

#4. Following the icon of the instruction and selecting the corresponding pipe. Installing the triangle construction on each layer until finish the frame on the top.

#5. Hanging up the cover fabric by crane first. And then tie the corner by rope. The most important step is covering the whole geodesic dome and put down gently. Of course, if you are building a small geodesic dome tent (dia. 3 – 10m), one or two men will finish this step. Crane will work for big geodesic dome tent (diameter over 10m).

#6. After the whole frame is covered by the PVC fabric, tightening the fabric with the steel base. Then, the installation of geodesic dome is finished.